白涧铁矿南区复杂地层钻探施工技术          下载免费PDF全文

李红梅  石逊 《探矿工程》2021,48(11):30-35

邢台白涧铁矿南区地层岩石破碎、部分地层含角砾、胶结性差、漏失严重,钻探施工中存在掉块卡钻、缩径、坍塌、埋钻及孔内泥浆全部漏失等难题。通过优化钻孔结构、使用新工艺、新方法,合理选择钻进参数,采用绳索取心钻进配合预留技术套管,有效解决了上部煤系地层的坍塌问题;采用反丝套管的方法,极大地减轻了由于地层缩径、掉块引起的套管下不到位、起拔困难等风险;常规型绳索取心钻杆替代套管方法的采用,提高了含角砾、松散地层的穿过速度,减少了钻探工作量的报废,加快了施工进度;特别是高胎体双水口钻头的使用,提高了钻进效率,节约了钻探施工成本,项目得以如期完成。  相似文献   

Kelvin-Voigt黏弹性介质井孔声场有限差分数值模拟与波形特征     

岳崇旺  王祝文 《吉林大学学报(地球科学版)》2021,51(4):1268-1275

岩石介质具有黏滞性,黏弹性介质模型相对于弹性介质模型更为接近岩石介质的真实情况。根据Kelvin-Voigt黏弹性单元体模型本构关系,推导了柱坐标系下各向同性黏弹性介质时间域交错网格有限差分方程,进行了黏弹性介质井孔声场的数值模拟。模拟结果表明：品质因子和声源中心频率对黏弹性介质中的井内外声场均有影响：井外声场和井内声场的衰减均随品质因子的增大而减小,井外声波和井内反射波振幅随之增大;井外声场的衰减随声源中心频率的增大而减小,井外声波振幅随之增大,井内声场的衰减随声源中心频率的增大而增大,井内反射波振幅随之减小。  相似文献   

From foredeep to orogenic wedge-top: The Cretaceous Songliao retroforeland basin,China     

《地学前缘(英文版)》2023,14(3):101527

Songliao Basin, the largest Mesozoic intracontinental nonmarine basin in eastern China, initiated during the latest Jurassic as a backarc extensional basin; rifting failed and thermal cooling controlled subsidence through the early Late Cretaceous. Integrating 2-D and 3D reflection seismic and borehole data with regional geological studies, we interpret sedimentary sequence and structural patterns of the Coniacian-Maastrichtian fill of Songliao Basin as defining a retroforeland basin system developed after 88 Ma (marked by the T11 unconformity in the basin), including (1) significant increase in the thickness of the Nenjiang Formation eastward towards orogenic highlands of the Zhangguangcai Range and the convergent continental margin; (2) a shift of detrital provenance in the basin from north to southeast; and (3) propagation of E-W shortened structures, increasing eastward in amplitude, frequency, and degree of inversion toward the orogen. During latest Cretaceous, foreland basin fill progressively deformed, as the foredeep evolved to a wedge-top tectonic setting, marked by the basin-wide T04 unconformity within the upper Nenjiang Formation at 81.6 Ma. Much of the basin was brought into the orogenic wedge and eroded by the end of the Cretaceous. Late Jurassic/Early Cretaceous backarc rifting of uncratonized basement comprised of accreted terranes likely facilitated and localized the foreland. Synrift normal faults reactivated and extensively inverted as thrust faults are prominent in the eastern 1/3 of the basin, whereas folds developed above detachments in shaley early post-rift strata dominate the western 2/3 of the basin. Songliao foreland development likely was driven by changing plate dynamics and collision along the Pacific margin after 88 Ma.  相似文献   

A Review of the Calculation Formula for the Four-component Borehole Strainmeter and Application to Earthquake Cases   总被引：1，自引：0，他引：1  

SU Kaizhi 《中国地震研究》2019,33(1):132-146

Based on the principle formula for the four-component strainmeters, we can directly obtain the specific plane strain, shear strain and azimuthal angle of the principal strain, and the maximum and minimum principal strains calculated afterwards are the indirect result. The problems of practicality of the sensitivity coefficients A and B of plane strain and shear strain are then discussed. Based on this idea, we analyzed the observation data of several four-component borehole strainmeters near the epicenter of the Yiliang M_S5.7 earthquake in 2012 and the Ludian M_S6.5 earthquake in 2014 in the Zhaotong area, Yunnan Province. The results show that the analysis based on the perspective of plane strain and shear strain has an obviously better effect than that based on the component readings, and can directly peel off the respective abnormality of the plane strain and shear strain. In addition, the correlation coefficient curves between measured data of two plane strains show significant anomalies which often occur several days before and during the earthquake.  相似文献   

Evaluating a process‐based model for use in streambank stabilization: insights on the Bank Stability and Toe Erosion Model (BSTEM)          下载免费PDF全文

Kate Klavon  Garey Fox  Lucie Guertault  Eddy Langendoen  Holly Enlow  Ron Miller  Anish Khanal 《地球表面变化过程与地形》2017,42(1):191-213

Streambank retreat is a complex cyclical process involving subaerial processes, fluvial erosion, seepage erosion, and geotechnical failures and is driven by several soil properties that themselves are temporally and spatially variable. Therefore, it can be extremely challenging to predict and model the erosion and consequent retreat of streambanks. However, modeling streambank retreat has many important applications, including the design and assessment of mitigation strategies for stream revitalization and stabilization. In order to highlight the current complexities of modeling streambank retreat and to suggest future research areas, this paper reviewed one of the most comprehensive streambank retreat models available, the Bank Stability and Toe Erosion Model (BSTEM), which has recently been integrated with several popular hydrodynamic and sediment transport models including the Hydrologic Engineering Center's River Analysis System (HEC‐RAS). The objectives of this paper were to: (i) comprehensively review studies that have utilized BSTEM and report their findings, (ii) address the limitations of the model so that it can be applied appropriately in its current form, and (iii) suggest directions of research that will help make the model a more useful tool in future applications. The paper includes an extensive overview of peer reviewed studies to guide future users of BSTEM. The review demonstrated that the model needs further testing and evaluation outside of the central United States. Also, further development is needed in terms of accounting for spatial and temporal variability in geotechnical and fluvial erodibility parameters, incorporating subaerial processes, and accounting for the influence of riparian vegetation on streambank pore‐water pressure dynamics, applied shear stress, and erodibility parameters. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

易县地震台四分量钻孔应变观测震前异常特征     

赵慧琴  王艳  张肖  马栋 《地震地磁观测与研究》2017,38(4):132-136

通过对河北易县地震台钻孔应变资料进行处理,发现在2014年9月6日涿鹿4.3级和2015年9月14日昌黎4.2级地震前,该台四分量钻孔应变观测到显著前兆异常变化,与2012年5月28日唐山4.8级地震前出现的异常相似度较高,异常形态均表现为"来快去慢",均在极值附近维持数日后,逐渐恢复原值过程中发生地震。  相似文献   

鄂尔多斯盆地南缘黄陵地区煤铀兼探钻孔数据集成与三维地质模型构建          下载免费PDF全文

张云  张天福  孙立新  程银行  张祺  王少轶  程先钰  周小希 《中国地质》2020,47(S1):231-240

鄂尔多斯盆地南缘黄陵地区铀成矿前景良好。中国地质调查局在该地区组织实施了含铀岩系三维地质调查工作，以寻找可地浸砂岩型铀矿找矿靶区为目标，采用“煤铀兼探”、“油铀兼探”的新思路，对煤田钻孔资料进行“二次开发利用”，开展勘查选区研究，完成了354口煤田钻孔（其中筛选出潜在砂岩型铀矿（化）孔49口）和21口铀矿验证钻孔（其中工业矿（化）孔16口）的数据采集建库，在此基础上建立了专题成果图集及三维地质模型。该数据库主要由含铀岩系地层厚度等值线图、砂体厚度等值线图、顶底板埋深等值线图、含砂率等值线图、放射性异常等值线图等专题成果图集和三维地质结构模型组成，为铀矿勘探开发提供了有利支撑和服务作用。  相似文献   

Inference of in situ stress from thermoporoelastic borehole breakouts based on artificial neural network     

Hua Zhang  Shunde Yin 《国际地质力学数值与分析法杂志》2019,43(16):2493-2511

The determination of in situ stresses is very important in petroleum engineering. Hydraulic fracturing is a widely accepted technique for the determination of in situ stresses nowadays. Unfortunately, the hydraulic fracturing test is time-consuming and expensive. Taking advantage of the shape of borehole breakouts measured from widely available caliper and image logs to determine in situ stress in petroleum engineering is highly attractive. By finite element modeling of borehole breakouts considering thermoporoelasticity, the authors simulate the process of borehole breakouts in terms of initiation, development, and stabilization under Mogi-Coulomb criterion and end up with the shape of borehole breakouts. Artificial neural network provides such a tool to establish the relationship between in situ stress and shape of borehole breakouts, which can be used to determine in situ stress based on different shape of borehole breakouts by inverse analysis. In this paper, two steps are taken to determine in situ stress by inverse analysis. First, sets of finite element modeling provide sets of data on in situ stress and borehole breakout measures considering the influence of drilling fluid temperature and pore pressure, which will be used to train an artificial neural network that can eventually represent the relationship between the in situ stress and borehole breakout measures. Second, for a given measure of borehole breakouts in a certain drilling fluid temperature, the trained artificial neural network will be used to predict the corresponding in situ stress. Results of numerical experiments show that the inverse analysis based on finite element modeling of borehole breakouts and artificial neural network is a promising method to determine in situ stress.  相似文献   

苏77-5-8H井大斜度穿煤层安全钻井技术          下载免费PDF全文

柯学  李继营  池崇荣  刘志良 《探矿工程》2011,38(12):13-17

苏77-5-8H井为苏里格气田苏77区块第一口利用水平井提高山23组开发效益的大斜度穿煤层水平井,目的层山23储集砂岩上部发育厚度25～30 m的碳质泥岩和煤层段,由于煤系地层的特殊性,钻进过程中易坍塌,且煤系地层正好处于入靶前的造斜井段,钻井施工难度大、风险高。在分析了煤层井壁稳定机理基础上,针对苏77区块地层特性和水平井钻井施工的难点,分析了该井主要技术难点,重点从井眼轨迹轨道设计优化、轨迹控制及施工技术措施和钻井液技术等方面对该井安全技术进行了全面的介绍,为今后同类井钻井提供可参考的经验。  相似文献   

破碎地层孔壁稳定技术的探讨与实践          下载免费PDF全文

胡继良  陶士先  纪卫军 《探矿工程》2011,38(9):30-32,64

在破碎地层钻探施工中,提高破碎带地层破碎岩块之间的胶结力、快速封堵地层裂缝形成完整孔壁及适当的冲洗液密度是破碎地层孔壁稳定的关键。防塌型随钻堵漏剂、改性沥青的加入能有效封堵地层裂缝,提高孔壁承压能力。LBM冲洗液体系和接枝淀粉冲洗液体系具有良好的造壁性能和流变性能,在破碎地层施工中取得良好的使用效果。  相似文献